Pinnacle-systems SS Bedienungsanleitung PDF herunterladen (Seite 12)

Optional Features

Model SS Safety Light Curtain

- A - 4 -

MULTI-PYLON (MP)

Description:

Multiple sets of light curtains operating independently

can be modiﬁ ed to operate together to prevent infrared

interference between each other, and optionally to

provide a single Dual Safety Output.

Wiring:

The Pink wire of each Receiver pylon must be connected

together as well as the White wires connected together.

Operation:

Standard= Each curtain uses its own Safety Outputs,

but do not interfere with each other.

Single Output: Blocking 1 curtain will shut down the

Safety Outputs of all connected light curtains.

Remote Status Display (RSD) Continued

The ﬁ rst three numbers displayed represent the ﬁ rst

problem beam on the guard starting from the cable end

of the pylon. The fourth number represents the total

number of beams blocked on the guard. Depending

if your beam spacing is 0.5” or 1.0” you can determine

which board in the pylon is bad.

Deﬁ nitions

BEAM #: Indicates ﬁ rst blocked beam (from cable

end). (i.e. 64 = 64” up with 1.0” beam

spacing, or 32” up with 0.5” spacing)

TOTAL #: Indicates total number of blocked beams

on the curtain.

(i.e., 1 to 9 beams then A to F = 10 to 15

beams)

The Diagnostics Display has two modes of operation:

Status and Fault. If a fault occurs, the display will scroll

the fault message until the power is removed.

Status Display Messages

Normal Operation

TEST Testing internal systems

RST Unit waiting for Push of FN1 (located on

control module power supply board middle

left hand side)

RDY Normal operation

Obstruction

03 > 15 or more beams blocked starting 3 beams

up from cable end

153 3 beams out starting 15 beams up from

cable end

Floating Blank

FB1 1 beam ﬂ oat maximum

FB2 2 beams ﬂ oat maximum

FB21 2 beams ﬂ oat maximum, 1 beam is blocked

OBST More than 2 separate objects detected in

curtain

Auto Blank

AB3 3 beams programmed in as an Auto Blank

object

PENT Mode 1 penetration into guard

SIZE Total number of allowable blanked beams

exceeded during programming

MOVE Auto Blank object(s) moved, uncovering

beam(s)

Cincinnati Interface

CINN Guard has de-energized safety relays,

forcing a false blockage mode

Beam # Total#

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Pinnacle-systems SS Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Relais Pinnacle-systems SS